CRBA installs flooring across Hayward, Castro Valley, San Leandro, Fremont, San Jose, and the greater Bay Area — hardwood, engineered wood, luxury vinyl plank, tile, laminate, and carpet — as part of a remodel or as a standalone project. What separates a floor that looks right for twenty years from one that gaps, cups, or cracks in two is what happens underneath: subfloor prep, leveling, moisture control, and the right material for the room. We do that part properly. Licensed general contractor since 2015. Lic #1095283.
CSLB Lic #1095283· Fully Insured · 10-Year Workmanship Warranty · Free Written Estimates
Talk to the contractor, not a call center.
Call (510) 990-9243, tell us the rooms, the square footage, and what’s on the floor now, and we’ll give you a working range.
Whatever flooring you’ve picked out, we handle the prep, the install, and the trim work.
Solid hardwood and engineered wood installed with proper acclimation, straight courses, and clean transitions. Engineered is the practical choice over concrete slabs and in Bay Area humidity swings; solid hardwood is refinishable for decades. We’ll tell you which suits your subfloor rather than which has a better margin.
The most-requested flooring in Bay Area homes right now — waterproof, quiet, warm underfoot, and convincing enough that guests ask if it’s wood. Ideal for kitchens, bathrooms, and households with kids and pets. Installed over properly prepped and leveled subfloors, which is where cheap LVP jobs fail.
Porcelain, ceramic, and natural stone set level and true with the right substrate and underlayment — the part that decides whether tile cracks in year three. Includes bathroom floors, kitchens, entries, and heated-floor systems where wanted.
Laminate for hardwood looks at a lower price point, and carpet installed tight and seamless with quality pad for bedrooms and stairs. Both installed with the same subfloor prep as anything else we lay.
The invisible service that determines everything else: fixing squeaks and soft spots, leveling dips and slopes, correcting slab moisture with the right barrier, and repairing water-damaged sheathing. Skipping this is why floors fail early — we quote it honestly instead of discovering it on install day.
Worn but sound hardwood doesn’t need replacing. We sand, stain, and refinish existing floors — including dustless and low-VOC systems — typically for a fraction of new flooring cost. Ask about no-sanding recoat options when the finish is worn but the wood is undamaged.
Don’t see your project? Call (510) 990-9243— we handle it all.
Call (510) 990-9243. We ask the rooms and rough square footage, what’s down now, what’s underneath (slab or raised foundation), and what you’re considering. You get a working range on that call.
Free visit. We measure, check the subfloor and moisture conditions, look at transitions and door clearances, and talk material honestly for each room. You get a written itemized quote — demo and haul-away, subfloor prep, material, installation, trim and transitions, timeline — before scheduling.
Furniture moved, old flooring removed and hauled, subfloor prepped and leveled, material acclimated where required, then installed with proper expansion gaps, transitions, and baseboards or shoe molding. Site cleaned daily. Final walkthrough before we call it done.
Realistic timeline: most single-room installs are 1–3 days; whole-home flooring 1–2 weeks depending on square footage, subfloor work, and material acclimation. Tile and refinishing add cure and dry time.
Realistic Bay Area ranges: installed pricing typically runs $[6–$10]/sq ft for laminate and sheet vinyl, $[9–$15]/sq ft for LVP, $[12–$22]/sq ft for engineered and solid hardwood, and $[15–$30]/sq ft for tile and stone. Hardwood refinishing typically $[4–$8]/sq ft — usually far less than replacement.
What you won’t pay for:
Call (510) 990-9243 with your square footage and the rooms involved.
Flooring quotes are notorious for one thing: the low bid that doesn’t include subfloor prep. Then the crew arrives, finds a dip or a soft spot, and the price changes. Our structure:
Phone range first. Square footage, material type, and slab vs. raised foundation gets you a working range.
Free in-home visit and written quote — with subfloor prep included as a real line. We check what’s under the old floor before quoting, not after demo.
Five things drive the price:
Based in Hayward, installing floors across the East Bay and South Bay:
Core service area: Hayward · Castro Valley · San Leandro · Fremont · Union City · San Jose
Also serving: Palo Alto · Mountain View · Sunnyvale · Cupertino · Santa Clara · Los Gatos · Oakland · San Francisco
In 2026, installed flooring in the Bay Area typically runs $[6–$10] per square foot for laminate and sheet vinyl, $[9–$15] for luxury vinyl plank, $[12–$22] for engineered and solid hardwood, and $[15–$30] for tile and natural stone. Subfloor prep, demolition of the old floor, and transitions affect the total as much as material choice.
Hardwood installation in the Bay Area generally runs $[12–$22] per square foot installed, depending on whether it's solid or engineered, board width, and subfloor condition. Refinishing existing hardwood instead typically costs $[4–$8] per square foot — so if your floors are worn but structurally sound, refinishing is usually the better value.
Choose LVP for waterproof durability in kitchens, bathrooms, basements, and homes with kids or pets — it's quieter, warmer underfoot, and needs almost no maintenance. Choose hardwood for resale appeal and longevity: solid hardwood can be refinished several times across 50+ years. Many Bay Area homeowners do both — hardwood in living areas, LVP in wet rooms.
Sometimes. If the wood itself is sound and only the finish is worn — dull, lightly scratched, no gray or water staining — a screen-and-recoat or chemical abrasion system can restore the finish without full sanding, faster and cheaper. Deep scratches, gray weathering, pet stains, or previous water damage require full sanding to reach clean wood. We assess which yours needs before quoting.
Solid hardwood can typically be refinished 4–6 times over its lifespan, depending on original thickness and how much material previous sandings removed. Engineered wood with a thick wear layer can usually be refinished once or twice; thin-veneer engineered flooring generally cannot be sanded at all.
Yes — common in Bay Area homes built on slab. It requires moisture testing and a proper vapor barrier, because slab moisture is the number one cause of failed flooring installs. Engineered wood, LVP, and tile all perform well over slab; solid hardwood generally needs a plywood subfloor installed first.
It's the most important part of the job and the most common corner cut. A floor is only as flat, quiet, and durable as what's beneath it — dips telegraph through LVP, movement cracks tile, and moisture destroys wood. A quote that doesn't mention subfloor prep isn't cheaper; it's incomplete. We show you the conditions we found so you can see why the line item exists.
Single rooms typically take 1–3 days. Whole-home flooring runs 1–2 weeks depending on square footage, demolition, and subfloor work. Tile adds mortar and grout cure time; hardwood refinishing adds drying time between coats, usually 3–5 days total during which the floors can't be walked on normally.
Usually no. We work room by room where possible so you keep functional space. Full-house refinishing is the exception — the finish needs to cure without foot traffic, so most clients stay elsewhere for a few nights or plan around one wing at a time.
Yes, we handle furniture moving as part of the project. Let us know about anything unusually heavy or fragile — pianos, aquariums, large safes — and we'll plan for it or coordinate a specialist.
Yes, and it's the efficient way to do it. Flooring has a specific place in the remodel sequence — after cabinets in kitchens, before baseboards, coordinated with door clearances. Bundling flooring into a kitchen remodel, bathroom remodel, or whole-home project avoids paying mobilization twice and prevents cutting into brand-new floors later.
Often, and where an exact match isn't possible — discontinued products, aged patina — we advise on transitions that look intentional rather than mismatched. Sometimes refinishing the existing floors alongside the new installation is the cleanest way to make everything read as one floor.
Read all 200+ verified reviews on Google before you decide.
Hardwood, LVP, tile, laminate, and carpet installation plus subfloor prep and hardwood refinishing across Hayward, Fremont, San Jose, and the Bay Area. Licensed general contractor, written itemized quotes with subfloor prep included. Free estimate.